| About |
|---|
| LS080S, homopolymer made by suspension polymerization, can be applied to hard or semi-hard products. Application: Hard sheets, films, fittings, injection molded products, bottles, innoxious films, innoxious containers, and food packaging.&& |
| Product Description | |
|---|---|
| Supplier | LG Chemical |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ASTM D792 |
| Apparent density | 0.55 to 0.63 | g/cm³ | ASTM D1895 |
| K-Value | 61.0 | DIN 53726 | |
| Particle size | < 99.8 | % | ASTM D1921 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| volatility | |||
| 1 hr，110℃ | < 0.30 | % | ASTM D3030 |
| Aggregation degree | |||
| 30℃ | 750 to 850 | JIS K6721 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |