| About |
|---|
| Description High Transparency, Heat Resistance, Chemical Resistance Application Refrigerator Sleeves, Miscellaneous&& |
| Product Description | |
|---|---|
| Supplier | LG Chemical |
| Generic | SAN |
| Material Status | Commercial: Active |
| Features | Good Clarity,High Heat Resistance,Solvent resistance,HB |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.07 | g/cm³ | ASTM D792 |
| Density | 1.07 | g/cm³ | ISO 1183-2 |
| Melt Flow Rate | ASTM D1238 | ||
| 200℃，5.0kg | 3.0 | g/10min | ASTM D1238 |
| 220℃，10.0kg | 29 | g/10min | ASTM D1238 |
| 230℃，3.80kg | 10 | g/10min | ASTM D1238 |
| Melt Volume Rate | |||
| 220℃，10 kg | 31.0 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.40 to 0.70 | % | ASTM D955 |
| Water absorption rate | |||
| saturated | 0.16 | % | ISO 62-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 2.80 | kJ/m² | ISO 179/1eA 2 |
| -30℃ | 2.00 | kJ/m² | ISO 179/1eA 2 |
| Charpy impact strength | |||
| 23℃ | 13.0 | kJ/m² | ISO 179/1eU 2 |
| -30℃ | 4.80 | kJ/m² | ISO 179/1eU 2 |
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -30℃，6.4mm | 9.8 | J/m | ASTM D256 |
| 23℃，6.4mm | 9.8 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 6.4 mm | 90.0 | ℃ | ASTM D648 |
| Glass transition temperature | 110 | ℃ | ISO 11357-2 2 |
| Vicat Softening Temp | 100 | ℃ | ASTM D1525 |
| B50 | 100 | ℃ | ISO 306 2 |
| Linear coefficient of thermal expansion | |||
| TD | 6.7E-5 | 1/℃ | ISO 11359-2 2 |
| MD | 6.7E-5 | 1/℃ | ISO 11359-2 2 |
| Relative temperature index | |||
| Electrical performance | 50.0 | ℃ | UL 746 |
| Strength mechanical performance | 50.0 | ℃ | UL 746 |
| Impact mechanical performance | 50.0 | ℃ | UL 746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+15 | ohms | IEC 60093 2 |
| Volume resistivity | > 1.0E+15 | ohms·cm | IEC 60093 2 |
| Dielectric strength | 51 | kV/mm | IEC 60243-1 2 |
| Compared to the leakage tracing index | |||
| CTI | 375 | IEC 60112 2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 1.60 mm | HB | UL 94 | |
| 3.20 mm | HB | UL 94 | |
| Flame retardant level | |||
| 3.20 mm | HB | ISO 1210 2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3300 | MPa | ISO 527-2 2 |
| 3.20 mm | 3110 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 70.0 | MPa | ISO 527-2 2 |
| Yield, 3.20 mm | 73.5 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 3.20 mm | 6.0 | % | ASTM D638 |
| fracture | 6.0 | % | ISO 527-2 2 |
| Bending modulus | |||
| 3.20 mm | 3680 | MPa | ASTM D790 |
| bending strength | |||
| 3.20 mm | 118 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 123 | ASTM D785 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Recommended maximum moisture content | < 0.010 | % | |
| Barrel rear temperature | 170 to 190 | °C | |
| Barrel middle temperature | 180 to 200 | °C | |
| Barrel front temperature | 190 to 210 | °C | |
| Nozzle temperature | 190 to 220 | °C | |
| Processing (melt) temperature | 190 to 220 | °C | |
| Mold temperature | 40 to 70 | °C | |
| Back pressure | 29.4 to 58.8 | MPa | |
| Screw speed | 30 to 60 | rpm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.039 in/min |
| 3. 2.0 in/min |
| 4. 0.59 in/min |
| 5. Rate B (120°C/h), Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |