Lifoflex® UV FLAM 90600

About
Lifoflex® UV FLAM 90600 Lifoflex® UV FLAM 90600是一种热塑性弹性体(TPE)材料,。该产品在欧洲有供货,加工方式为:挤出或注射成型。 Lifoflex® UV FLAM 90600的主要特性有: 阻燃/额定火焰通过 ROHS 认证 Flame Retardant 附着力强加工性能良好典型应用领域包括: 工程/工业配件电气/电子应用电线电缆建筑应用&&Lifoflex® UV FLAM 90600 Lifoflex FLAM are a range of halogen-free flame retardant thermoplastic elastomers (TPEs) designed to meet the most demanding applications where resistance to ignition and burning are important features. Lifoflex FLAM compounds contain additives to give them better resistance to burning compared to general TPE grades. The range includes halogen, chlorine and antimony free grades which are low smoke and compliant with the Restriction of Hazardous Substances (RoHS) directives, offering flame retardancy without the use of polybrominated diphenyl ether (PBDE).&&

About

Lifoflex® UV FLAM 90600 Lifoflex® UV FLAM 90600是一种热塑性弹性体(TPE)材料,。该产品在欧洲有供货,加工方式为:挤出或注射成型。 Lifoflex® UV FLAM 90600的主要特性有: 阻燃/额定火焰通过 ROHS 认证 Flame Retardant 附着力强加工性能良好典型应用领域包括: 工程/工业配件电气/电子应用电线电缆建筑应用&&Lifoflex® UV FLAM 90600 Lifoflex FLAM are a range of halogen-free flame retardant thermoplastic elastomers (TPEs) designed to meet the most demanding applications where resistance to ignition and burning are important features. Lifoflex FLAM compounds contain additives to give them better resistance to burning compared to general TPE grades. The range includes halogen, chlorine and antimony free grades which are low smoke and compliant with the Restriction of Hazardous Substances (RoHS) directives, offering flame retardancy without the use of polybrominated diphenyl ether (PBDE).&&

Product Description
Generic	TPE
Material Status	Commercial: Active
Features	Excellent Processability,Good flexibility,Low smoke,Good Dimensional Stability,Halogen free,Flame Characteristics,Low toxicity,No antimony,Good bond,V-0
Availabilitys	Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.03	g/cm³	ISO 1183/A

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 3 seconds	90		DIN 53505

elastic body	Nominal value	Unit	Test method
tensile strength
Flow rate, yield	9.00	MPa	DIN 53504
Tensile strain
Flow rate, fracture	730	%	DIN 53504
Compression deformation			ISO 815
23℃，72 hr	46	%	ISO 815
70℃，22 hr	72	%	ISO 815

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
3.00 mm	V-0		UL 94
Glowing wire flammability index
3.0 mm	650 850	℃	IEC 60695-2-12

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.