LIHAN® B706BK

About
A special Material of glass fiber reinforced nylon for automotive intake manifold Pamphlet: Automotive intake manifold has complex formation and its internal air flow channel which requires a high surface glossiness. Besides, aluminum alloy machining process is more expensive. As a result, replacing alloy with glass fiber reinforced nylon to produce intake manifold has become the leading trend of the automotive industry. Not only can it reduce cost, but also meet environmental protection and energy-saving requirements. In addition to high mechanical strength, the material is required to have excellent liquidity to ensure surface glossiness of the air flow channel.Special Material developed by our company has a high tensile strength and impact strength, and also has a melt flow rate larger than 40g/10 min. The material can be used to automotive intake manifold.&&

Product Description
SupplierLihan
GenericPA Not specified
Material StatusCommercial: Active
FeaturesGood Rigidity,Good surface appearance,High impact resistance,Good Tensile Strength
AvailabilitysAsia Pacific
Process MethodsInjection Molding

Technical Data

Process Conditions
injectionNominal valueUnitTest method
Processing (melt) temperature260 to 300°C
Mold temperature80 to 100°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.