LIHAN® CS100

About
LIHAN® CS100 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in Asia Pacific. Primary characteristic: flame rated.&&

Product Description
SupplierLihan
GenericPC+ABS
Material StatusCommercial: Active
FeaturesHB
AvailabilitysAsia Pacific
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Density1.20g/cm³ISO 1183
Shrinkage rate0.40 to 0.70%
water content0.10%ISO 62

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch70kJ/m²ISO 180

THERMALNominal valueUnitTest method
Hot deformation temperature
0.45 MPa, unannealed110ISO 75-2/B

Electrical performanceNominal valueUnitTest method
Surface resistivity1.0E+14ohmsASTM D257
Dielectric strength17kV/mmASTM D149

FLAME CHARACTERISTICSNominal valueUnitTest method
1.60 mmHB UL 94

MECHANICALNominal valueUnitTest method
Rockwell hardness
R-level115 ISO 2039-2
tensile strength
fracture55.0MPaISO 527-2
Tensile strain
fracture120%ISO 527-2
Bending modulus2300MPaISO 178
bending strength100MPaISO 178

Process Conditions
injectionNominal valueUnitTest method
Processing (melt) temperature240 to 275°C
Mold temperature50 to 70°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.