LIHAN® P9000 - SOLIAO

About
LIHAN® P9000 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by injection molding and is available in Asia Pacific. Primary characteristic: flame rated.&&

Product Description
Supplier	Lihan
Generic	ABS
Material Status	Commercial: Active
Features	V-2
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.990	g/cm³	ISO 1183
Shrinkage rate	1.8 to 2.2	%

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	95.0	℃	ISO 75-2/B
Melting temperature	160	℃	DSC

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+16	ohms	ASTM D257
Dielectric strength	19	kV/mm	ASTM D149

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	V-2		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	90		ISO 2039-2
tensile strength
fracture	28.0	MPa	ISO 527-2
Tensile strain
fracture	3.0	%	ISO 527-2
bending strength	40.0	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	180 to 210	°C
Mold temperature	40 to 50	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.