LINATHENE® LL405

About
LINATHENE LL405 is a linear low density polyethylene (LLDPE) developed for rotational molding. LINATHENE LL405 has excellent environmental stress crack resistance, chemical inertness, low temperature impact strength, rigidity, toughness combined with good moldability and make this resin especially suitable for rotational molding. LINATHENE LL405 can be ground into powders then molded into large parts, such as storage tanks for chemicals or water, tool boxes, water drums, etc&&

About

LINATHENE LL405 is a linear low density polyethylene (LLDPE) developed for rotational molding. LINATHENE LL405 has excellent environmental stress crack resistance, chemical inertness, low temperature impact strength, rigidity, toughness combined with good moldability and make this resin especially suitable for rotational molding. LINATHENE LL405 can be ground into powders then molded into large parts, such as storage tanks for chemicals or water, tool boxes, water drums, etc&&

Product Description
Supplier	USI
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good flexibility,Low density,low-temperature impact resistance,High ESCR
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.936	g/cm³	ASTM D1505
Melt Flow Rate	5.3	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength			ASTM D638
Yield, molding	18.6	MPa	ASTM D638
Fracture, molded	19.6	MPa	ASTM D638
Tensile strain
Fracture, molded	900	%	ASTM D638

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -76.0	℃	ASTM D746
Vicat Softening Temp	115	℃	ASTM D1525
Melting peak temperature	125	℃	ASTM D3418

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.