LinGen FR345 - SOLIAO

About
LinGen FR345 is a Thermoplastic Elastomer, Ether-Ester (TEEE) material. It is available in Asia Pacific for extrusion. Important attributes of LinGen FR345 are: Flame Retardant Halogen Free&&

Product Description
Supplier	Lin Gen
Generic	TEEE
Material Status	Commercial: Active
Features	Halogen free,Flame Characteristics
Availabilitys	Asia Pacific
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.24	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	45		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
yield	22.0	MPa	ASTM D412
Tensile strain
fracture	370	%	ASTM D412

Aging performance	Nominal value	Unit
The rate of change in tensile strength
140℃，168 hr	-20	%
Change rate of ultimate elongation
140℃，168 hr	-20	%

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	> 1.0E+12	ohms	ASTM D257
Dielectric strength	25	kV/mm	ASTM D149
Dielectric constant
1 MHz	5.30		ASTM D150
Dissipation factor
1 MHz	0.050		ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame test	VW-1		UL 1581

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.