| About |
|---|
| Liten BB 85 F is a high-density polyethylene produced by Unipetrol RPA using UNIPOL gas-phase technology. Characteristics: C6 – copolymer natural pellets meets European Pharmacopoeia 8: (Ph.Eur. 8, 3.1.3) International designation: ISO 17855-PE-HD,B,50-T012 Application: containers up to 5 l cable ducts corrugated pipes&& |
| Product Description | |
|---|---|
| Generic | PE copolymerization |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good flexibility,High impact resistance,Wide molecular weight distribution,Copolymer,High ESCR |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.953 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，2.16kg | 0.24 | g/10min | ISO 1133 |
| 190℃，21.6kg | 20 | g/10min | ISO 1133 |
| 190℃，5.0kg | 1.1 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| F50 | 500 | hr | ASTM D1693 |
| Full incision creep test | |||
| 9 MPa，2%，50℃ | 12.0 | hr | ISO 16770 |
| Melt flow ratio | |||
| 21.6/2.16 | 90.0 | ||
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30℃ | 4.5 | kJ/m² | ISO 179 |
| 23℃ | 10 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 46.0 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | 125 | ℃ | ISO 306 |
| Melting temperature | 130 | ℃ | ISO 11357-3 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Blow Molding Melt Temperature | 180 to 225 | ℃ | |
| Blow Molding Mold Temperature | 20 to 30 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 61 | ISO 868 | |
| tensile strength | |||
| yield | 26.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| yield | 10 | % | ISO 527-2 |
| Bending modulus | 1150 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. (100%) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |