| About |
|---|
| 适用于制作薄膜制品，如各种农膜、地膜、日用包装袋，垃圾袋也可制作各种注塑和农用小口径排水管材。具有开口性：易于揭开特性：熔体粘度高，弹性小，具有良好的成膜性、薄膜抗刺性强 |
| Product Description | |
|---|---|
| Supplier | PETROCHEMICAL |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | High Viscosity |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Particle appearance (large and small particles) | |||
| qualified | ≤10 | g/kg | |
| First level | ≤10 | g/kg | |
| Superior | ≤10 | g/kg | |
| Particle appearance (pollution particles) | |||
| qualified | ≤10 | 个/kg | |
| First level | ≤20 | 个/kg | |
| Superior | ≤40 | 个/kg | |
| Particle appearance (snake skin and silk hair) | |||
| qualified | ≤20 | 个/kg | |
| First level | ≤20 | 个/kg | |
| Superior | ≤40 | 个/kg | |
| Fish eye (0.4mm) | |||
| qualified | ≤15 | 个/1520cm² | |
| First level | ≤25 | 个/1520cm² | |
| Superior | ≤40 | 个/1520cm² | |
| Fish eye (0.8mm) | ≤2 | ||
| qualified | ≤4 | 个/1520cm² | |
| First level | ≤8 | 个/1520cm² | |
| Superior | 个/1520cm² | ||
| Melt Flow Rate | |||
| qualified | 2.0±0.4 | g/10min | |
| First level | 2.0±0.3 | g/10min | |
| Superior | 2.0±0.2 | g/10min | |
| Density | |||
| qualified | 0.923±0.004 | g/cm³ | |
| First level | 0.923±0.003 | g/cm³ | |
| Superior | 0.923±0.002 | g/cm³ | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of falling darts | |||
| First level | ≥60 | g | |
| Superior | ≥60 | g |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | |||
| First level | ≤14 | % | |
| Superior | ≤14 | % |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |