| About |
|---|
| A permanent antistatic PC-Alloy compound that features transparency and superior cleanliness for advanced semiconductor packaging applications&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PC + Polyester |
| Material Status | Commercial: Active |
| Features | Low (to None) Ion Content,Antistatic property |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.16 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 260℃，2.16kg | 16 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| Equilibrium, 23 ℃, 50% RH | 0.70 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| — | 1160 | MPa | ASTM D638 |
| — | 1180 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 35.0 | MPa | ASTM D638 |
| yield | 34.0 | MPa | ISO 527-2/5 |
| Tensile strain | |||
| fracture | 200 | % | Internal Method |
| fracture | 140 | % | ISO 527-2/5 |
| Bending modulus | |||
| 50 mm span | 1160 | MPa | ASTM D790 |
| — | 1140 | MPa | ISO 178 |
| bending strength | |||
| Fracture, 50 mm span | 50.0 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 69 | kJ/m² | ISO 179/2C |
| Impact strength of cantilever beam notch | |||
| 23℃ | 580 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed, 6.4 mm | 83.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 6.4 mm | 73.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 64 mm span | 68.0 | ℃ | ISO 75-2/Af |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+11 to 5.0E+12 | ohms | ASTM D257 |
| Volume resistivity | 1.0E+11 to 5.0E+12 | ohms·cm | ASTM D257 |
| Electrostatic attenuation | 2.0 | sec | FTMS 101B |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | |||
| 2540 µm | 81.0 | % | ASTM D1003 |
| Haze | |||
| 2540 µm | 10 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 90.0 to 95.0 | °C | |
| Drying time | 6.0 to 8.0 | hr | |
| Barrel rear temperature | 220 to 230 | °C | |
| Barrel middle temperature | 225 to 240 | °C | |
| Barrel front temperature | 230 to 250 | °C | |
| Nozzle temperature | 230 to 250 | °C | |
| Processing (melt) temperature | 230 to 250 | °C | |
| Mold temperature | 40.0 to 50.0 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |