| About |
|---|
| LNP* Thermocomp* DX13354 compound is a 10% glass fiber reinforced, impact modified PC resin based LDS material solution with stable plating and RF performance. Good surface aesthetics and wide processing window makes it a good candidate for internal and external parts for Laser Direct Structuring applications.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Good surface appearance,High impact resistance,Electroplating |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.27 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 300℃，1.20kg | 29 | g/10min | ASTM D1238 |
| Shrinkage rate | Internal Method | ||
| MD：3.2 mm | 0.30 | % | Internal Method |
| TD：3.2 mm | 0.50 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3800 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 60.0 | MPa | ISO 527-2/5 |
| Tensile strain | |||
| fracture | 4.1 | % | ASTM D638 |
| Bending modulus | |||
| 50 mm span | 3600 | MPa | ASTM D790 |
| bending strength | |||
| Yield, 50 mm span | 110 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 170 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | |||
| 23℃ | 700 | J/m | ASTM D4812 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed, 3.2 mm | 125 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 3.2 mm | 119 | ℃ | ASTM D648 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | Internal Method | ||
| 1.10 GHz | 3.05 | Internal Method | |
| 1.9 GHz | 3.05 | Internal Method | |
| 5.00 GHz | 3.04 | Internal Method | |
| Dissipation factor | Internal Method | ||
| 1.1 GHz | 0.014 | Internal Method | |
| 1.9 GHz | 0.013 | Internal Method | |
| 5 GHz | 0.011 | Internal Method |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 110 | °C | |
| Drying time | 3.0 to 4.0 | hr | |
| Barrel rear temperature | 270 to 295 | °C | |
| Barrel middle temperature | 270 to 295 | °C | |
| Barrel front temperature | 270 to 295 | °C | |
| Nozzle temperature | 270 to 295 | °C | |
| Processing (melt) temperature | 270 to 295 | °C | |
| Mold temperature | 100 to 120 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |