About |
---|
LOCTITE® SI 5055™ is a one-component, (UV) visible light curable silicone adhesive specifically designed for use in assembly of disposable medical devices. It is a low viscosity high performance silicone adhesive that upon exposure to light, cures into a tough transparent silicone rubber.&& |
Product Description | |
---|---|
Supplier | Henkel |
Generic | 硅酮 |
Material Status | Commercial: Active |
Features | Good flexibility,Low Viscosity,UV Cure |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
MECHANICAL | Nominal value | Unit | Test method |
Shore hardness | |||
Shaw’s A | 57 | ISO 868 |
film | Nominal value | Unit | Test method |
---|---|---|---|
tensile strength | |||
fracture | 9.30 | MPa | ISO 527-3 |
Tensile strain | |||
fracture | 160 | % | ISO 527-3 |
elastic body | Nominal value | Unit | Test method |
---|---|---|---|
Compression deformation | |||
22℃,24 hr | 7.9 | % | |
70℃,24 hr | 42 | % | |
121℃,24 hr | 92 | % | |
150℃,24 hr | 93 | % |
Electrical performance | Nominal value | Unit | Test method |
---|---|---|---|
Volume resistivity | 1.1E+15 | ohms·cm | IEC 60093 |
Dielectric strength | 15 | kV/mm | IEC 60243-1 |
Dielectric constant | |||
1 kHz | 2.80 | ||
10 kHz | 2.80 | ||
100 kHz | 2.80 | ||
1 MHz | 2.70 | ||
10 MHz | 2.80 | ||
Dissipation factor | |||
1 kHz | 0.030 | ||
10 kHz | 4.0E-3 | ||
100 kHz | 6.0E-3 | ||
1 MHz | 6.0E-3 | ||
10 MHz | 0.010 |
Uncured Properties | Nominal value | Unit | Test method |
---|---|---|---|
colour | |||
Density | 0.978 | g/cm³ | |
viscosity | |||
25℃,Brookfield RVT | 0.20 to 0.85 | Pa·s |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
2. Spindle 2, speed 20 rpm |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |