| About |
|---|
| LOCTITE STYCAST 2651MM CAT 23LV is a general purpose encapsulant designed for machine dispensing and for parts requiring post molding machining. LOCTITE STYCAST 2651MM CAT 23LV can be used with a variety of catalysts. For more information on mixed properties when used with other available catalysts, please contact your local technical service representative for assistance and recommendations. Product Benefits General purpose Low viscosity Low color Good machinability Excellent adhesion to glass Thermal shock and impact resistant Reduced abrasion in meter/mix equipment&& |
| Product Description | |
|---|---|
| Supplier | Henkel |
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | High impact resistance,Low Viscosity,Machinable,Good bond,Baking,Good thermal shock resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Water absorption rate | |||
| 24hr | 0.20 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | |||
| MD | 5.1E-5 | 1/℃ | |
| Thermal conductivity coefficient | 0.60 | W/m/K |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | |||
| 25 ℃ | 5.0E+15 | ohms·cm | |
| Dielectric strength | 18 | kV/mm | |
| Dielectric constant | |||
| 1 MHz | 4.80 | ||
| Dissipation factor | |||
| 1 MHz | 0.060 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| working temperature | -55 to 155 | ℃ |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Weight Mix Ratio (PBW) | |||
| Part B | 15 | ||
| Volume Mixing Ratio (PBV) | |||
| Part A | 100 | ||
| Part B | 25 | ||
| Density | |||
| — | 1.52 | g/cm³ | |
| — | 1.61 | g/cm³ | |
| viscosity | |||
| 25℃ | 0.025 | Pa·s | |
| — | 35 | Pa·s | |
| Curing time | |||
| 65℃ | 2.0 to 4.0 | hr | |
| 45℃ | 4.0 to 6.0 | hr | |
| 25℃ | 24 | hr | |
| storage stability | |||
| 25 ℃ | 60 | min | |
| Storage period | |||
| 25℃ | 12 | month |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 86 | ||
| tensile strength | 55.0 | MPa | |
| bending strength | 104 | MPa | |
| compressive strength | 83.0 | MPa |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Mixed |
| 3. Part A |
| 4. Part B |
| 5. Part A, Spindle 5, speed 5 rpm |
| 6. 100 g mass |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |