| About |
|---|
| Product Description | |
|---|---|
| Supplier | Chang Chun |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Specific Gravity | 1.56 | ||
| Water Absorption | 0.2 | % | ASTM D570 |
| Molding shrinkage | 1.0 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Flexural Strength | 90 | MPa | ASTM D790 |
| Tensile Strength | 50 | MPa | ASTM D638 |
| Compressive Strength | 190 | MPa | ASTM D695 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Impact strength of simply supported beams | 3.5 | Kgf/cm | ASTM D256 |
| Izod Impact strength of cantilever beam | 2.8 | Kgf/cm | ASTM D256 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric Strength | 13 | kV/mm | ASTM D149 |
| Insulation resistance | |||
| N | 1E11 | ohm | ASTM D257 |
| B | 1E9 | ohm | ASTM D257 |
| Volume Resistance | 1E13 | ohm·cm | ASTM D257 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | |||
| 0.45 mm | V-0 | calss | UL 94 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| 170 | ℃ | ||
| Relative Temperature Index (RTI) | 150 | ℃ | |
| Coeff. of linear thermal expansion | 3 | ||
| D495 PLC Level | 5 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |