Lotader® 4613

About
LOTADER® 4613 is a random terpolymer of ethylene, acrylic ester and maleic anhydride, polymerized by high-pressure process. APPLICATIONS LOTADER® 4613 is an ultra-versatile ready-to-use tie layer for extrusion coating and lamination. LOTADER® 4613 provides excellent adhesion in direct bonding onto printed, reverse-printed and plain films (OPET, OPP, CPP, OPA). LOTADER® 4613 is suitable for extrusion coating lamination onto foil, metallized films, paper and board.&&

About

LOTADER® 4613 is a random terpolymer of ethylene, acrylic ester and maleic anhydride, polymerized by high-pressure process. APPLICATIONS LOTADER® 4613 is an ultra-versatile ready-to-use tie layer for extrusion coating and lamination. LOTADER® 4613 provides excellent adhesion in direct bonding onto printed, reverse-printed and plain films (OPET, OPP, CPP, OPA). LOTADER® 4613 is suitable for extrusion coating lamination onto foil, metallized films, paper and board.&&

Product Description
Supplier	Arkema
Generic	AEM
Material Status	Commercial: Negative
Features	Good bond,Terpolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ISO 1183 , ASTM D1505
Melt Flow Rate
190℃，2.16kg	7.0	g/10min	ASTM D1238，ISO 1133
Methacrylic acid content	24.0	wt%
Maleic anhydride content	0.3	wt%

THERMAL	Nominal value	Unit	Test method
Melting temperature	98.0	℃	ISO 11357-3

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.