Lotader® AX 8900

About
LOTADER® AX8900 is a random terpolymer of ethylene, acrylic ester and glycidyl methacrylate, polymerized by high-pressure autoclave process. Acrylic ester brings softness and polarity, while keeping high thermal stability during processing. The high content of acrylic ester leads to high flexibility (low cristallinity) and high impact absorption behaviour. Glycidyl methacrylate gives reactivity (versus OH, COOH and NH 2 groups), leading to optimal dispersion during melt mixing with engineering thermoplastics. As an ethylene copolymer, LOTADER® AX8900 is compatible with LDPE in all proportions, and with almost all other ethylene copolymers. LOTADER® AX8900 exhibits good adhesion on PET, PBT, PPS, metal, paper, and glass. Applications Due to its properties, LOTADER® AX8900 is suitable as additive (toughener) to improve the impact strength of engineering thermoplastics like polyesters (PBT, PET), PC/PBT and PC/ABS alloys, PPS. It can also be use as a compatibilizer for polyesters/polyolefins blends and in some formulated adhesive tapes. For more detailed information and recommendations regarding your specific application, please contact your local ARKEMA technical representative.&&

About

LOTADER® AX8900 is a random terpolymer of ethylene, acrylic ester and glycidyl methacrylate, polymerized by high-pressure autoclave process. Acrylic ester brings softness and polarity, while keeping high thermal stability during processing. The high content of acrylic ester leads to high flexibility (low cristallinity) and high impact absorption behaviour. Glycidyl methacrylate gives reactivity (versus OH, COOH and NH 2 groups), leading to optimal dispersion during melt mixing with engineering thermoplastics. As an ethylene copolymer, LOTADER® AX8900 is compatible with LDPE in all proportions, and with almost all other ethylene copolymers. LOTADER® AX8900 exhibits good adhesion on PET, PBT, PPS, metal, paper, and glass. Applications Due to its properties, LOTADER® AX8900 is suitable as additive (toughener) to improve the impact strength of engineering thermoplastics like polyesters (PBT, PET), PC/PBT and PC/ABS alloys, PPS. It can also be use as a compatibilizer for polyesters/polyolefins blends and in some formulated adhesive tapes. For more detailed information and recommendations regarding your specific application, please contact your local ARKEMA technical representative.&&

Product Description
Supplier	Arkema
Generic	EMAAA
Material Status	Commercial: Active
Features	Good flexibility,High impact resistance,Machinable,Good bond,Terpolymer,Heat Stabilized,High reactivity
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ISO 1183 , ASTM D1505
Melt Flow Rate
190℃，2.16kg	6.0	g/10min	ASTM D1238，ISO 1133
Methacrylic acid content	24.0	wt%
Glycidyl Methacrylate Content	8.0	wt%

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	< 40.0	℃	ISO 306/A , ASTM D1525 2
Melting temperature	65.0	℃	ISO 11357-3

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ASTM D2240 , ISO 868
Shore A, 1 second, molded	64		ASTM D2240 , ISO 868
Shore D, 1 second, molded	18		ASTM D2240 , ISO 868
tensile strength
Fracture, molded	4.00	MPa	ASTM D638 , ISO 527-2
Tensile strain
Fracture, molded	1100	%	ASTM D638 , ISO 527-2
Bending modulus
Compression Molding	< 30.0	MPa	ASTM D790 , ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
2. Loading 1 (10 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.