| About |
|---|
| Lotrène® LDPE FB3003 is a Low Density Polyethylene product. It can be processed by blown film, extrusion, or film extrusion and is available in Africa & Middle East or Europe. Applications of Lotrène® LDPE FB3003 include agricultural, bags/liners, bottles, construction applications and film. Characteristics include: REACH Compliant Food Contact Acceptable High ESCR (Stress Crack Resistant)&& |
| Product Description | |
|---|---|
| Supplier | QAPCO |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Food contact compliance,High ESCR |
| Availabilitys | Africa & Middle East ,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.30 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | 0.50 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 50 | µm | |
| film thickness | 50 to 250µm | ||
| tensile strength | ASTM D882 | ||
| MD, yield, 50 µ m | 16.0 | MPa | ASTM D882 |
| TD, yield, 50 µ m | 11.0 | MPa | ASTM D882 |
| MD, fracture, 50 µ m | 25.0 | MPa | ASTM D882 |
| TD, fracture, 50 µ m | 25.0 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 50 µ m | 550 | % | ASTM D882 |
| TD, fracture, 50 µ m | 600 | % | ASTM D882 |
| Drop hammer impact | |||
| 50 µm | 220 | g | ASTM D1709 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 95.0 | ℃ | ASTM D1525 |
| Crystallization peak temperature | |||
| DSC | 109 | ℃ | ASTM E794 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45°，50 µm | 40 | ASTM D2457 | |
| transparency | |||
| 50.0 µm | 25.0 | ASTM D1746 | |
| Haze | |||
| 50 µm | 13 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 180 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. F50 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |