LTM® 123 - SOLIAO

About
LTM123 is a low temperature curing, toughened cyanate ester component prepreg developed for structural applications requiring ultimate dimensional stability in a space environment. Its low moisture absorption and low electrical permittivity characteristics also make it suitable for radomes and radar absorbing structures. LTM123 is also suitable for high service temperature structural applications in the motorsport market. LTM123 can be processed using autoclave and oven vacuum bag methods to produce low voidage composites and can be moulded off a range of low cost tooling with few constraints on structure dimensions. For space applications, LTM 123 can develop a Tg of 140°C (284°F) after a minimum initial cure at 80°C (176°F) and a free-standing post-cure of 120°C (248°F) For motorsport applications, LTM 123 can develop a Tg of 250°C (482°F) after a minimum initial cure at 80°C (176°F) and free-standing post-cure of 240°C (464°F)&&

About

LTM123 is a low temperature curing, toughened cyanate ester component prepreg developed for structural applications requiring ultimate dimensional stability in a space environment. Its low moisture absorption and low electrical permittivity characteristics also make it suitable for radomes and radar absorbing structures. LTM123 is also suitable for high service temperature structural applications in the motorsport market. LTM123 can be processed using autoclave and oven vacuum bag methods to produce low voidage composites and can be moulded off a range of low cost tooling with few constraints on structure dimensions. For space applications, LTM 123 can develop a Tg of 140°C (284°F) after a minimum initial cure at 80°C (176°F) and a free-standing post-cure of 120°C (248°F) For motorsport applications, LTM 123 can develop a Tg of 250°C (482°F) after a minimum initial cure at 80°C (176°F) and free-standing post-cure of 240°C (464°F)&&

Product Description
Supplier	Cytec Industries
Generic	热固性聚酯
Material Status	Commercial: Active
Features	Good flexibility,Good Dimensional Stability,High Heat Resistance,Moisture resistance,Baking,High pressure heat resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³

Electrical performance	Nominal value	Unit	Test method
Dielectric constant
14.0 GHz	2.77

Cured Properties	Nominal value	Unit	Test method
Linear Shrinkage	0.020	%

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.