| About |
|---|
| Resin of LTP CE-2200 serials is a kind of engineering plastic with high performance based on PPS. For its excellent electric conduction property, it is mainly applied in thermostatic parts or shell for electric heating instrument. Thermal conduction and insulation materials made by Resin of LTP CE-2200 serials have these characteristic: high temperature control precise, resistance to water, oil-proof, good safety, light weight and wear well.&& |
| Product Description | |
|---|---|
| Supplier | Letian |
| Generic | PPS |
| Material Status | Commercial: Active |
| Features | Conductive,High Heat Resistance,Moisture resistance,Good wear resistance,Grease resistance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.60 to 1.90 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| 3.0 mm | 0.50 to 0.80 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 100 to 125 | MPa | GB/T 1040 |
| Tensile strain | |||
| fracture | 1.2 | % | GB/T 1040 |
| Bending modulus | 80000 | MPa | GB/T 1042 |
| bending strength | 120 to 150 | MPa | GB/T 1042 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 10 | kJ/m² | GB/T 1043 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | > 260 | ℃ | GB/T 1634 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+4 to 1.0E+6 | ohms·cm | GB/T 1410 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 80x80x3 mm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |