LTP PA6150 - SOLIAO

About
LTP PA6150 is a Thermoplastic product. It is available in Asia Pacific. Primary characteristic: flame rated.&&

Product Description
Supplier	Letian
Generic	热塑性聚酯
Material Status	Commercial: Active
Features	V-0
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.35	g/cm³	GB/T 1033
Water absorption rate
Saturation, 23 ℃	0.70	%	GB/T 1034

MECHANICAL	Nominal value	Unit	Test method
tensile strength	150	MPa	GB/T 1040
Tensile strain
fracture	5.0	%	GB/T 1040
bending strength	200	MPa	GB/T 1042

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	10	kJ/m²	GB/T 1043

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	240	℃	GB/T 1634

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+13	ohms	GB/T 1410
Volume resistivity	1.0E+12	ohms·cm	GB/T 1410
Dielectric strength	30	kV/mm	GB/T 1408
Dielectric constant
25 ℃，1 kHz	4.00		GB/T 1409
Dissipation factor
25℃，1 kHz	0.010		GB/T 1409

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.