LUBMER™ TM-80B

About
A highly engineered thermoplastic material for use as an ultra-thin coextruded layer in demanding applications requiring, superior low friction and abrasion resistance properties. Lubmer TM-80B is a UV stable grade possessing exceptional friction and abrasion performance. TM-80B is engineered to have outstanding adhesion to Sarlink TPV materials. Together these materials create effective system for vehicle sealing applications such as glass run channels, waist belts, auxiliary seals, and other profiles or articles.&&

About

A highly engineered thermoplastic material for use as an ultra-thin coextruded layer in demanding applications requiring, superior low friction and abrasion resistance properties. Lubmer TM-80B is a UV stable grade possessing exceptional friction and abrasion performance. TM-80B is engineered to have outstanding adhesion to Sarlink TPV materials. Together these materials create effective system for vehicle sealing applications such as glass run channels, waist belts, auxiliary seals, and other profiles or articles.&&

Product Description
Supplier	Mitsui
Generic	TPV
Material Status	Commercial: Active
Features	Weather resistance is good,Smoothness,Good Dimensional Stability,Good Hardness,Low coefficient of friction,High Heat Resistance,Good bond,Low density,Solvent resistance
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
elastic body	Nominal value	Unit	Test method
tensile strength
TD, fracture	32.0	MPa	ASTM D412
Tensile strain
TD, fracture	30	%	ASTM D412

Legal Statement	Nominal value	Unit	Test method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore D, 5 seconds, injection molding	66		ASTM D2240
Bending modulus	700	MPa	ASTM D790
friction coefficient	< 0.15		ASTM D1894

PHYSICAL	Nominal value	Unit	Test method
Density	0.970	g/cm³	ASTM D1505
Apparent viscosity of melt
200℃，206 sec^-1	562	Pa·s	ASTM D3835

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	177 to 210	°C
Barrel 2 zone temperature	182 to 216	°C
Barrel 3 zone temperature	193 to 227	°C
Barrel 4 zone temperature	193 to 227	°C
Barrel 5 zone temperature	193 to 227	°C
Nozzle temperature	193 to 227	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.