| About |
|---|
| Product characteristics Energy-saving Especially aligned to the sliding partner PET Suitable for contact with foodstuffs (FDA/21CFR177.1520) Product applications Materials handling industry Automation&& |
| Product Description | |
|---|---|
| Generic | Ultra-high molecular weight polyethylene |
| Material Status | Commercial: Active |
| Features | Low coefficient of friction,Food contact compliance,Nontoxicity,HB |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.930 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| Equilibrium, 23 ℃, 50% RH | < 0.010 | % | ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 无断裂 | ISO 179 | |
| Charpy Unnotch Impact strength | ISO 179 | ||
| — | 无断裂 | ISO 179 | |
| — | 100 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | < 130 | ℃ | |
| Melting temperature | 133 to 135 | ℃ | DSC |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+14 | ohms | DIN VDE 0303 |
| Volume resistivity | > 1.0E+15 | ohms·cm | DIN VDE 0303 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 3.00 mm | HB | UL 94 | |
| 6.00 mm | HB | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Material Designation | UHMW-PE-QCD 35-3-4 | ISO 1872 | |
| Using – Sliding properties: partner PET | 0.100 | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 60 | ISO 868 | |
| Tensile modulus | 650 | MPa | ISO 527-2/1B/1 |
| tensile strength | |||
| yield | 20.0 | MPa | ISO 527-2/1B/50 |
| Tensile strain | |||
| yield | 14 | % | ISO 527-2/1B/50 |
| fracture | > 50 | % | ISO 527-2 |
| Wear Resistance – Sand-slurry method | 90.0 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |