Lucalen G3710E

About
Lucalen G3710E is a maleic anhydride grafted polyethylene resin with a high thermal stability and good flexibility. Lucalen G3710E is primarily designed to be used as the adhesive layer between the top coat polyethylene and the epoxy layer in a 3-layer coating system with easy processing charcteristics. Lucalen G3710E is available in pellet form.&&

Product Description
SupplierLyondellBasell
GenericPE
Material StatusCommercial: Active
FeaturesExcellent Processability,Good heat aging resistance,Good flexibility,Good bond,Copolymer,Heat Stabilized
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density0.931g/cm³ISO 1183
Apparent density> 0.50g/cm³ISO 60
Melt Flow Rate
190℃,2.16kg1.5g/10minISO 1133
water content< 0.10%ISO 15512

filmNominal valueUnitTest method
peel strength DIN 30670
23℃> 20.0kN/mDIN 30670
80℃> 4.0kN/mDIN 30670

THERMALNominal valueUnitTest method
Embrittlement temperature< -56.7ASTM D746
Vicat Softening Temp
A50> 100ISO 306/A50
Melting temperature
DSC125ISO 3146

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s D51 ISO 868
Tensile modulus
23℃400MPaISO 527-1-2
tensile strength
Yield, 23 ℃12.0MPaISO 527-2/50
Tensile strain
Fracture, 23 ℃> 700%ISO 527-2/50

Process Conditions
ExtrusionNominal valueUnitTest method
Melt temperature215 to 240°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.