Lucene™ SP 980

About
LUCENE™ SP 980, LG PE-RT(Type I) is a high performance MDPE for hot and cold water pipe. It is developed by using a new LG catalyst technology. It has excellent stress crack resistance properties and Long Term Hydrostatic strength. LUCENE™ SP 980 Polyethylene Resin meets requirements of the FDA regulation 177.1520 and NSF/ANSI Standard 61 (Drinking Water System Components – Health Effect). Applications Hot & cold drinking water pipe, Floor heating, Radiator connection, Al composite pipe&&

About

LUCENE™ SP 980, LG PE-RT(Type I) is a high performance MDPE for hot and cold water pipe. It is developed by using a new LG catalyst technology. It has excellent stress crack resistance properties and Long Term Hydrostatic strength. LUCENE™ SP 980 Polyethylene Resin meets requirements of the FDA regulation 177.1520 and NSF/ANSI Standard 61 (Drinking Water System Components – Health Effect). Applications Hot & cold drinking water pipe, Floor heating, Radiator connection, Al composite pipe&&

Product Description
Supplier	LG Chemical
Generic	PE
Material Status	Commercial: Active
Features	Excellent Processability,Hydrolysis stability
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.938	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.60	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
50 ℃，F50	> 10000	hr	ASTM D1693

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃，6.4 mm	无断裂		ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	124	℃	ASTM D1525
thermal stability
Hydrostatic strength	Pass

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	56		ASTM D2240
tensile strength			ASTM D638
yield	18.6	MPa	ASTM D638
fracture	34.3	MPa	ASTM D638
Tensile strain
fracture	700	%	ASTM D638
Bending modulus	549	MPa	ASTM D790
Internal pressure resistance
1 Hr	Pass
1000 Hr	Pass
165 Hr	Pass

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.