Lumid® GP-2300A(W)

About
Description General Purpose Applications Automotive(Side Mirror Base Plate)&&

Product Description
SupplierLG Chemical
GenericPA6
Material StatusCommercial: Active
FeaturesHB
AvailabilitysNorth America,Latin America,Asia Pacific,Europe
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Density1.35g/cm³ASTM D792
Shrinkage rate
MD:3.2 mm0.40 to 0.90%ASTM D955
Water absorption rate
23℃,24hr1.1%ASTM D570

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch
23℃,3.2mm120J/mASTM D256

THERMALNominal valueUnitTest method
Hot deformation temperature
1.8 MPa, unannealed, 6.4 mm210ASTM D648
Melting peak temperature220ASTM D3418
Linear coefficient of thermal expansion
MD3.5E-51/℃ASTM D696

Electrical performanceNominal valueUnitTest method
Volume resistivity1.0E+14ohms·cmASTM D257
Dielectric strength
1 mm20kV/mmASTM D149
Dielectric constant
1 MHz3.80 ASTM D150
Arc resistance130secASTM D495

FLAME CHARACTERISTICSNominal valueUnitTest method
Flame retardant level
0.75 mmHB UL 94

MECHANICALNominal valueUnitTest method
tensile strength
Yield, 3.20 mm177MPaASTM D638
Tensile strain
Fracture, 3.20 mm3.0%ASTM D638
Bending modulus
3.20 mm8340MPaASTM D790
bending strength
Yield, 3.20 mm255MPaASTM D790
Rockwell hardness
R-level121 ASTM D785

Process Conditions
injectionNominal valueUnitTest method
Drying temperature80 to 100°C
Drying time4.0 to 5.0hr
Recommended maximum moisture content0.12%
Barrel rear temperature250 to 270°C
Barrel middle temperature260 to 285°C
Barrel front temperature260 to 290°C
Nozzle temperature270 to 290°C
Processing (melt) temperature260 to 290°C
Mold temperature80 to 110°C
Back pressure 40.981 to 2.94MPa
Screw speed60 to 150rpm

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.20 in/min
3. 0.051 in/min
4. Hydraulic Type
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.