| About |
|---|
| Lupolen 1800 S is a low density polyethylene (LDPE) resin used in injection molding and other processing methods. It exhibits high flowability, and good softness, toughness and dimensional stability. Lupolen 1800 S is delivered in pellet form and is not additivated. Lupolen 1800 S is used in applications such as toys, caps & closures, engineering parts, and sports and leisure equipment. Lupolen 1800 S is not intended for use in medical and pharmaceutical applications.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good flexibility,Good Dimensional Stability,High liquidity,Quick molding cycle,Low density,Soft,low-temperature impact resistance |
| Availabilitys | Africa & Middle East ,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.917 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 20 | g/10min | ISO 1133 |
| Spiral flow length | 65.0 | cm | Internal Method |
| ESCR(Environmental Stress Cracking Resistance) | 1.50 | hr | ASTM D1693 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | 80.0 | ℃ | ISO 306/A50 |
| Melting temperature | |||
| DSC | 106 | ℃ | ISO 3146 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 45 | ISO 868 | |
| Ball hardness | 13.0 | MPa | ISO 2039-1 |
| Tensile modulus | 160 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 8.00 | MPa | ISO 527-2 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 180 to 230 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Melt Temperature: 356°F, Injection Pressure: 1.45E+4 psi |
| 3. 2 mm |
| 4. Tested in 10% nonionic surfactants |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |