Lupolen 3621 M RM

About
Lupolen 3621 M RM is a new generation hexene linear medium-density polyethylene for rotational molding. Typical customer applications include agricultural and chemical storage containers, technical parts and automotive parts. This product exhibits excellent ESCR and high impact strength at low temperatures. Lupolen 3621 M RM is a fully UV-stabilized and pelletized polymer. Tests have shown that this material is resisting against the harmful effect of biodiesel fuel. It is not intended for use in medical and pharmaceutical applications. Resistance is based on our latest patented technology&&

About

Lupolen 3621 M RM is a new generation hexene linear medium-density polyethylene for rotational molding. Typical customer applications include agricultural and chemical storage containers, technical parts and automotive parts. This product exhibits excellent ESCR and high impact strength at low temperatures. Lupolen 3621 M RM is a fully UV-stabilized and pelletized polymer. Tests have shown that this material is resisting against the harmful effect of biodiesel fuel.** It is not intended for use in medical and pharmaceutical applications. ** Resistance is based on our latest patented technology&&

Product Description
Supplier	LyondellBasell
Generic	MDPE
Material Status	Commercial: Active
Features	Weather resistance is good,Low warping,Excellent Processability,High impact resistance,low-temperature impact resistance,Hexene copolymers,High ESCR,Fuel resistance
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.936	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	7.5	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)	> 1000	hr	ASTM D1693B
Full incision creep test
50℃	15.0	hr	ISO 16770

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	700	MPa	ISO 527-2
tensile strength
yield	17.0	MPa	ISO 527-2
Tensile strain
fracture	> 450	%	ISO 527-3
yield	10	%	ISO 527-2

film	Nominal value	Unit	Test method

IMPACT	Nominal value	Unit	Test method
Tensile impact strength			ISO 8256/1A
-30℃	104	kJ/m²	ISO 8256/1A
23℃	213	kJ/m²	ISO 8256/1A

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
A50	113	℃	ISO 306/A50

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	180 to 210	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.