| About |
|---|
| Lupolen 5021 DX is a high density polyethylene (HDPE) resin used in a wide range of processing methods. Typical customer applications for small blow molding include packaging for consumer goods, surfactants, toys and engineering parts. It exhibits good chemical resistance and good ESCR as well as good flowability and organoleptic properties. Lupolen 5021 DX is delivered in pellet form, contains antioxidants and has a broad molecular weight distribution. Lupolen 5021 DX is not intended for use in medical and pharmaceutical applications.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Wide molecular weight distribution,Good liquidity,Inoxidizability,Good sensory characteristics.,Solvent resistance,High ESCR |
| Availabilitys | Africa & Middle East ,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.950 | g/cm³ | ISO 1183 |
| Apparent density | > 0.50 | g/cm³ | ISO 60 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，2.16kg | 0.25 | g/10min | ISO 1133 |
| 190℃，21.6kg | 22 | g/10min | ISO 1133 |
| 190℃，5.0kg | 1.0 | g/10min | ISO 1133 |
| Full incision creep test | |||
| 3.5 MPa，80℃ | 10.0 | hr | ISO 16770 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 6℃ | 6.0 | kJ/m² | ISO 179/1eA |
| Tensile impact strength | |||
| -30℃ | 100 | kJ/m² | ISO 8256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | 128 | ℃ | ISO 306/A50 |
| B50 | 78.0 | ℃ | ISO 306 |
| Melting temperature | |||
| DSC | 131 | ℃ | ISO 3146 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Ball hardness | |||
| H 132/30 | 45.0 | MPa | ISO 2039-1 |
| Tensile modulus | 1000 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 25.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| yield | 9.0 | % | ISO 527-2 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 170 to 200 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2% Arkopal N100 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |