About |
---|
Lupolen GX 4087 is a low density polyethylene (LDPE), natural colour, without antioxidants and very low gel level for medium high voltage cable insulation. LyondellBasell quality system is designed to assure the high standards of cleanliness of Lupolen GX 4087. A dedicated production procedure is maintained and the product is tested by using online measurements. This grade is not intended for use in medical or pharmaceutical applications.&& |
Product Description | |
---|---|
Supplier | LyondellBasell |
Generic | LDPE |
Material Status | Commercial: Active |
Features | Excellent Processability,Low speed solidification point,Homopolymer |
Availabilitys | Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 0.924 | g/cm³ | ISO 1183 |
Melt Flow Rate | |||
190℃,2.16kg | 1.9 | g/10min | ISO 1133 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Vicat Softening Temp | |||
A50 | 94.0 | ℃ | ISO 306/A50 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw’s D | 48 | ISO 868 | |
Ball hardness | |||
H 49/30 | 18.0 | MPa | ISO 2039-1 |
Tensile modulus | 260 | MPa | ISO 527-2 |
tensile strength | ISO 527-2 | ||
yield | 11.0 | MPa | ISO 527-2 |
— | 18.0 to 26.0 | MPa | ISO 527-2 |
Tensile strain | |||
yield | 250 to 600 | % | ISO 527-2 |
Process Conditions | |||
---|---|---|---|
Extrusion | Nominal value | Unit | Test method |
Melt temperature | 160 to 200 | °C |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |