| About |
|---|
| Lupoy® EU5008是一种丙烯腈-苯乙烯-丙烯酸酯 + PC (ASA+PC)材料,。 该产品在北美洲、拉丁美洲、欧洲或亚太地区有供货,。&& |
| Product Description | |
|---|---|
| Supplier | LG Chemical |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.14 | g/cm³ | ASTM D792 |
| Melt Flow Rate | ASTM D1238 | ||
| 250℃，2.16kg | 4.7 | g/10min | ASTM D1238 |
| 260℃，5.0kg | 24 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 51.0 | MPa | ISO 527-2 |
| yield | 53.9 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | > 100 | % | ASTM D638 |
| yield | > 100 | % | ISO 527-2 |
| Bending modulus | 2400 | MPa | ASTM D790 |
| Bending modulus | 2110 | MPa | ISO 178 |
| bending strength | 77.5 | MPa | ISO 178 |
| yield | 91.2 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -30℃ | 140 | J/m | ASTM D256 |
| 23℃ | 590 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | |||
| 23℃ | 35 | kJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 105 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 107 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | |||
| B50 | 125 | ℃ | ISO 306 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |