| About |
|---|
| Lupoy® GP5200 is a Polycarbonate + ABS (PC+ABS) material filled with 20% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Typical applications include: Automotive Housings&& |
| Product Description | |
|---|---|
| Supplier | LG Chemical |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Availabilitys | Europe,Asia Pacific,Latin America,North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Specific Gravity | 1.3 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 250℃，2.16kg | 2.5 | g/10min | ASTM D1238 |
| Shrinkage Rate – Flowing Molding Shrinkage Flow | |||
| MD: 3.2 mm, injection molding | 0.10 to 0.30 | % | ASTM D955 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| IZOD Notched Impact Strength of Cantilever Beam | |||
| 23 ℃, 3.2mm, injection molding | 98 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.8 MPa, unannealed, 6.4 mm, injection molded | 124 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Yield, 3.20 mm, injection molding | 93.1 | MPa | ASTM D638 |
| Tensile Strain | |||
| Fracture, 3.20 mm, injection molding | 2.0 | % | ASTM D638 |
| Flexural Modulus | |||
| 3.20 mm, injection molding | 5292 | MPa | ASTM D790 |
| Flexural Strength | |||
| Yield, 3.20 mm, injection molding | 137.2 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 115 | ASTM D785 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Drying Temperature | 85-95 | °C | |
| Drying Time | 3-5 | hr | |
| Rear Temperature of Material Barrel | 220-240 | °C | |
| Middle Temperature in the middle of the barrel | 235-255 | °C | |
| Front Temperature of Material Barrel | 250-265 | °C | |
| Nozzle Temperature | 250-265 | °C | |
| Melt Temperature | 235-265 | °C | |
| Mold Temperature | 50-80 | ℃ | |
| Screw Speed | 40-70 | rpm | |
| Maximum Moisture Content | 0.02 | % | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. 0.051 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |