| About |
|---|
| LUPOY 5000 series is PC/ABS alloy that combine the superior impact strength and the heat resistance of PC with the processibility and ductility of ABS. LUPOY GP-5206F is glass fiber reinforced PC/ABS alloy which offers good processibility and heat resistance. The grade fits the requirement of Underwriters Laboratories for UL 94 V-0(1/16″) flammability ratings. The flammability and processibility of this grade makes it suitable for electric/electronics applications.&& |
| Product Description | |
|---|---|
| Supplier | LG Chemical |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High impact resistance,Ductility,Flame Characteristics,High Heat Resistance,V-0 |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.35 | g/cm³ | ASTM D792 |
| Density | 1.34 | g/cm³ | ISO 1183-2 |
| Melt Volume Rate | |||
| 260℃，5 kg | 12.3 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| MD：3.2 mm | 1.0 to 3.0 | % | ASTM D955 |
| Water absorption rate | |||
| saturated | 0.10 | % | ISO 62-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 8.20 | kJ/m² | ISO 179/1eA 2 |
| -30℃ | 7.50 | kJ/m² | ISO 179/1eA 2 |
| Charpy impact strength | |||
| 23℃ | 38.3 | kJ/m² | ISO 179/1eU 2 |
| -30℃ | 35.9 | kJ/m² | ISO 179/1eU 2 |
| Impact strength of cantilever beam notch | |||
| 23℃ | 69 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 3.2 mm | 120 | ℃ | ASTM D648 |
| 1.8 MPa | 125 | ℃ | ISO 75-2 2 |
| 0.45 MPa | 135 | ℃ | ISO 75-2 2 |
| Glass transition temperature | 140 | ℃ | ISO 11357-2 2 |
| Vicat Softening Temp | |||
| B50 | 127 | ℃ | ISO 306 2 |
| Linear coefficient of thermal expansion | |||
| TD | 6.2E-5 | 1/℃ | ISO 11359-2 2 |
| MD | 2.9E-5 | 1/℃ | ISO 11359-2 2 |
| Relative temperature index | |||
| Electrical performance, 1.70 mm | 60.0 | ℃ | UL 746 |
| Strength mechanical performance, 1.70 mm | 60.0 | ℃ | UL 746 |
| Impact mechanical performance, 1.70 mm | 60.0 | ℃ | UL 746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+15 | ohms | IEC 60093 2 |
| Volume resistivity | > 1.0E+15 | ohms·cm | IEC 60093 2 |
| Dielectric strength | 28 | kV/mm | IEC 60243-1 2 |
| Relative permittivity | |||
| 1 MHz | 3.10 | IEC 60250 2 | |
| Dissipation factor | |||
| 1 MHz | 0.010 | IEC 60250 2 | |
| Compared to the leakage tracing index | |||
| CTI | 200 | IEC 60112 2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | V-0 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 6300 | MPa | ISO 527-2 2 |
| tensile strength | 93.2 | MPa | ASTM D638 |
| fracture | 96.0 | MPa | ISO 527-2 2 |
| Tensile strain | |||
| fracture | 1.8 | % | ISO 527-2 2 |
| fracture | 4.0 | % | ASTM D638 |
| Bending modulus | |||
| 3.17 mm | 5690 | MPa | ASTM D790 |
| bending strength | |||
| Yield, 3.17 mm | 137 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 117 | ASTM D785 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 to 100 | °C | |
| Drying time | 3.0 to 4.0 | hr | |
| Barrel rear temperature | 235 to 245 | °C | |
| Barrel middle temperature | 245 to 255 | °C | |
| Barrel front temperature | 245 to 255 | °C | |
| Nozzle temperature | 245 to 255 | °C | |
| Mold temperature | 50 to 70 | °C | |
| Injection pressure | 58.8 to 118 | MPa | |
| Back pressure | 0.981 to 3.92 | MPa | |
| Screw speed | 40 to 80 | rpm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3. 18 °F/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |