| About |
|---|
| Description General Purpose, High Impact, Good Coloring, Chemical Resistance Application Mobile Phone Housing&& |
| Product Description | |
|---|---|
| Supplier | LG Chemical |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Solvent resistance,HB,Good coloring,High impact resistance |
| Availabilitys | Latin America,Asia Pacific,Europe,North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| 1.20 | g/cm³ | ASTM D792 | |
| Melt Flow Rate | |||
| 300℃，1.20kg | 12 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.50 to 0.80 | % | ASTM D955 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | ASTM D256 | ||
| -30℃，3.2mm | 290 | J/m | ASTM D256 |
| 23℃，3.2mm | 690 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 0.45 MPa, unannealed, 6.4 mm | 130 | ℃ | ASTM D648 |
| Relative Temperature Index (RTI) | |||
| Electrical performance | 80.0 | ℃ | UL 746 |
| Strength mechanical performance | 80.0 | ℃ | UL 746 |
| Impact mechanical performance | 80.0 | ℃ | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 0.70 mm | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Yield yld, 3.20 mm | 56.9 | MPa | ASTM D638 |
| Tensile Strain | |||
| Broken BRK, 3.20 mm | 130 | % | ASTM D638 |
| 3.20 mm | 2160 | MPa | ASTM D790 |
| Yield yld, 3.20 mm | 88.3 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 117 | ASTM D785 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Drying Temperature | 100 to 110 | °C | |
| Drying Time | 3.0 to 5.0 | hr | |
| Suggested Maximum Moisture Content | < 0.020 | % | |
| Rear Temperature Zone 1 | 275 to 290 | °C | |
| Middle Temperature Zone 2 | 285 to 305 | °C | |
| Front Temperature Zone 3 | 290 to 310 | °C | |
| Nozzle Temperature | 285 to 305 | °C | |
| Melt Temperature | 290 to 310 | °C | |
| Mold Temperature | 80 to 110 | °C | |
| Back Pressure | 0.981 to 3.92 | MPa | |
| Screw Speed | 40 to 70 | rpm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. 0.39 in/min |
| 4. 18.6kg |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |