| About |
|---|
| Luran SAN C is an injection molding grade of SAN with medium impact strength and high flow. FEATURES Transparent High flow Medium impact strength APPLICATIONS Home appliances Electrical and electronics General Injection Molding Application&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | SAN |
| Material Status | Commercial: Active |
| Features | High liquidity |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 220℃，10 kg | 23.0 | cm³/10min | ISO 1133 |
| Shrinkage rate | 0.30 to 0.40 | % | ISO 294-4 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 2.0 | kJ/m² | ISO 180-A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, annealed | 103 | ℃ | ISO 75-2/B |
| 1.8 MPa, annealed | 101 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | 104 | ℃ | ASTM D1525 4 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | |||
| 550 nm | 87.0 to 88.0 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 126 | ISO 2039-2 | |
| Tensile modulus | 3700 | MPa | ISO 527-2 |
| tensile strength | |||
| Yield, 23 ℃ | 68.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | 3.2 | % | ISO 527-2 |
| Bending modulus | 3800 | MPa | ISO 178 |
| bending strength | 111 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 4h/80°C |
| 3. Rate B (120°C/h), Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |