Lushan L-5R - SOLIAO

About
Polyethylene Copolymer Adhesive for Steel Pipe Coating Copolymer adhesive resin Lushan L-5R series is maleic anhydride grafted polyethylene which could be in granule or powder form. It was developed by Lushan with independent patent technologies and proved with excellent performance in the widely applications of pipeline projects both in China and international market. The purpose of the adhesive is to bond the epoxy layer to the top coat.Copolymer adhesive resin Lushan L-5R series is mainly used as adhesive layer in 3 layers polyethylene system(3LPE) for steel pipe against corrosion coating system in oil and gas pipeline and high pressure water pipeline. Copolymer adhesive resin Lushan L-5R series has good properties such as high bonding strength, long-term stability, wide compatibility, easy processing, etc. Copolymer adhesive resin Lushan L-5R series is designed to meet with requirements of the following National and International standards, under the condition that appropriate industrial processing method are applied under a continuous quality control system and when used in combination with copolymer adhesive resin Lushan L-5R& polyethylene compound top coats EJ-1 and a compatible powder epoxy. NFA 49710 CAN/CSA-Z245.21 DIN 30670S Draft ISO 21809-1&&

About

Polyethylene Copolymer Adhesive for Steel Pipe Coating Copolymer adhesive resin Lushan L-5R series is maleic anhydride grafted polyethylene which could be in granule or powder form. It was developed by Lushan with independent patent technologies and proved with excellent performance in the widely applications of pipeline projects both in China and international market. The purpose of the adhesive is to bond the epoxy layer to the top coat.Copolymer adhesive resin Lushan L-5R series is mainly used as adhesive layer in 3 layers polyethylene system(3LPE) for steel pipe against corrosion coating system in oil and gas pipeline and high pressure water pipeline. Copolymer adhesive resin Lushan L-5R series has good properties such as high bonding strength, long-term stability, wide compatibility, easy processing, etc. Copolymer adhesive resin Lushan L-5R series is designed to meet with requirements of the following National and International standards, under the condition that appropriate industrial processing method are applied under a continuous quality control system and when used in combination with copolymer adhesive resin Lushan L-5R& polyethylene compound top coats EJ-1 and a compatible powder epoxy. NFA 49710 CAN/CSA-Z245.21 DIN 30670S Draft ISO 21809-1&&

Product Description
Supplier	Lushan
Generic	PE copolymerization
Material Status	Commercial: Negative
Features	Excellent Processability,Copolymer,Good stability
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.930	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	2.3	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	20.0	MPa	ASTM D638
Tensile strain
fracture	860	%	ASTM D638

film	Nominal value	Unit	Test method
peel strength			ISO 21809-1
20℃	> 16.0	kN/m	ISO 21809-1
50℃	> 13.0	kN/m	ISO 21809-1
60℃	> 9.0	kN/m	ISO 21809-1

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-70.0	℃	ASTM D746
Vicat Softening Temp	104	℃	ASTM D1525
Melting peak temperature	128	℃	ASTM D2117

Supplementary information	Nominal value	Unit	Test method
working temperature	-40 to 60	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.