Lushan M-10F - SOLIAO

About
Adhesive Resin for Multi-layer Sausages Casing film Adhesive resin Lushan series for sausages casing film is anhydride-modified polyethylene product and is available in pellet form. Adhesive resin Lushan series for sausages casing film is designed for multi-layer sausages casing films composed of polyethylene (PE) and EVOH or PA. Lushan adhesive resins are based on LLDPE and are highly stabilized for multi-layer sausages casing films application in three layer casing film like PA/Tie layer resin/PA and five layer casing film like PA/Tie layer resin/PE/Tie resin/PA. Lushan casing film adhesive resin created super adhesion between EVOH and PE while maintaining an excellent processability equivalent to that of common LLDPE. Adhesive resin Lushan series for food package complys with FDA 21CFR175.105 and suitable for indirect food contact.&&

About

Adhesive Resin for Multi-layer Sausages Casing film Adhesive resin Lushan series for sausages casing film is anhydride-modified polyethylene product and is available in pellet form. Adhesive resin Lushan series for sausages casing film is designed for multi-layer sausages casing films composed of polyethylene (PE) and EVOH or PA. Lushan adhesive resins are based on LLDPE and are highly stabilized for multi-layer sausages casing films application in three layer casing film like PA/Tie layer resin/PA and five layer casing film like PA/Tie layer resin/PE/Tie resin/PA. Lushan casing film adhesive resin created super adhesion between EVOH and PE while maintaining an excellent processability equivalent to that of common LLDPE. Adhesive resin Lushan series for food package complys with FDA 21CFR175.105 and suitable for indirect food contact.&&

Product Description
Supplier	Lushan
Generic	PE
Material Status	Commercial: Negative
Features	Excellent Processability,Food contact compliance,Good bond
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	3.2	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	16.0	MPa	ASTM D638
Tensile strain
fracture	600	%	ASTM D638

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-70.0	℃	ASTM D746
Vicat Softening Temp	65.0	℃	ASTM D1525
Melting peak temperature	122	℃	ASTM D2117

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.