Lutene® XL8080TR

About
Description LUTENE® XL8080TR has excellent electrical properties for medium voltage power cable insulation and especially it shows improved water tree resistance and has thermal aging property. Applications Cross-linkable polyethylene compound for water tree retardant medium voltage power cable insulation with rated voltage up to 36kV. Specification LUTENE® XL8080TR meets the property requirement of the following material specifications. AEIC CS8 ICEA S-94-649, S-93-639 / NEMA WC74 IEC 60502 CENELEC HD620 BS 6622&&

Product Description
SupplierLG Chemical
GenericPE
Material StatusCommercial: Active
FeaturesGood surface appearance
AvailabilitysNorth America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density0.921g/cm³ISO 1183/D
The degree of cross combination> 80%ASTM D2765A

MECHANICALNominal valueUnitTest method
tensile strength
yield> 17.7MPaISO 527-2
Tensile strain
yield500%ISO 527-2

Aging performanceNominal valueUnitTest method
The rate of change in tensile strength
135℃,168 hr< 5.0%IEC 60811-1-2
Change rate of ultimate elongation
135℃,168 hr< 5.0%IEC 60811-1-2

Electrical performanceNominal valueUnitTest method
Volume resistivity1.0E+16ohms·cmIEC 60093
Dielectric strength> 22kV/mmIEC 60243-1
Dielectric constant
1 MHz2.25 IEC 60250
Dissipation factor
1 MHz6.0E-4 IEC 60250

Process Conditions
ExtrusionNominal valueUnitTest method
Melt temperature125 to 135°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. 23°C
3. 9.8 in/min
4. 0.2 MPa
5. 0.01M NaCl, 5kV, 1kHz
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.