| About |
|---|
| Description LUTENE® XL8080UCS is a superior cleanliness version for high and extra high voltage power cable insulation and is designated as UC (Ultra-Clean) due to its extremely low level of contamination. Applications Cross-linkable polyethylene compound for high and extra high voltage power cable insulation with rated voltage up to 230kV Specification LUTENE® XL8080UCS meets the property requirement of the following material specifications. AEIC CS9 AEIC CS8 KSC 3611 ICEA S-94-649 IEC 60502 IEC 60840 IEC 62067&& |
| Product Description | |
|---|---|
| Supplier | LG Chemical |
| Generic | PE |
| Material Status | Commercial: Active |
| Features | High purity,Good Electrical Properties,Crosslinked |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 | g/cm³ | ASTM D1505 |
| The degree of cross combination | > 80 | % | ASTM D2765A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 19.6 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 500 | % | ASTM D638 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strength retention rate | > 95 | % | ASTM D638 |
| Elongation retention rate | > 95 | ppm | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| thermosetting | IEC 60811-2-1 | ||
| Elongation under load | < 100 | % | IEC 60811-2-1 |
| Permanent deformation | < 10 | % | IEC 60811-2-1 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | |||
| 23℃ | > 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric strength | > 22 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 1 MHz | 2.30 | ASTM D150 | |
| Dissipation factor | |||
| 1 MHz | 3.0E-4 | ASTM D150 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 3. 9.8 in/min |
| 4. 0.2 MPa |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |