| About |
|---|
| LUVOCOM® 1100-7725 VP是一种聚醚砜(PES)材料,含有的填充物为玻璃纤维增强材料。 该产品在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货,。 LUVOCOM® 1100-7725 VP的主要特性有: 阻燃/额定火焰 具可灭菌性 良好的尺寸稳定性 耐热 润滑 典型应用领域包括: 电气/电子应用 工程/工业配件 电影 反射镜 航空航天&& |
| Product Description | |
|---|---|
| Supplier | Lehmann |
| Generic | PES |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Good disinfection,Steam sterilized,Hydrolysis stability,High Heat Resistance,Lubricating,V-0 |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.45 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 345℃，5 kg | 16.0 | cm³/10min | ISO 1133 |
| Shrinkage rate | 0.40 to 0.70 | % | DIN 16901 |
| Water absorption rate | |||
| 23℃，24hr | < 0.10 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 4500 | MPa | ISO 527-2 |
| tensile strength | |||
| fracture | 110 | MPa | ISO 527-2 |
| Tensile strain | |||
| yield | 4.0 | % | ISO 527-2 |
| Bending modulus | 3500 | MPa | ISO 178 |
| bending strength | 150 | MPa | ISO 178 |
| Bending strain | 4.5 | % | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | 42 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | 180 | ℃ | UL 746B |
| Maximum operating temperature | |||
| short-term | 200 | ℃ | |
| Vicat Softening Temp | 215 | ℃ | ISO 306/A |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| insulation resistance | > 1.0E+12 | ohms | IEC 60167 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature – hot air dryer | 150 | °C | |
| Drying time – hot air dryer | 3.0 to 5.0 | hr | |
| Barrel rear temperature | 355 to 375 | °C | |
| Barrel middle temperature | 360 to 380 | °C | |
| Barrel front temperature | 350 to 370 | °C | |
| Nozzle temperature | 340 to 360 | °C | |
| Processing (melt) temperature | 350 | °C | |
| Mold temperature | 120 to 200 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |