| About |
|---|
| LUVOCOM® 1200-8835是一种丙烯腈丁二烯苯乙烯(ABS)材料,。 该产品在欧洲、非洲和中东、北美洲、拉丁美洲或亚太地区有供货,。 LUVOCOM® 1200-8835的主要特性有: 抗静电 水解稳定性 耐化学品 典型应用领域包括: 工具 容器 工程/工业配件&& |
| Product Description | |
|---|---|
| Supplier | Lehmann |
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability,Solvent resistance,Antistatic property |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.65 | g/cm³ | ISO 1183 |
| Shrinkage rate | 0.20 to 0.30 | % | DIN 16901 |
| Water absorption rate | |||
| 23℃，24hr | < 0.30 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 5000 | MPa | ISO 527-2 |
| tensile strength | |||
| fracture | 16.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| yield | 1.1 | % | ISO 527-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | 60.0 | ℃ | UL 746B |
| Maximum operating temperature | |||
| short-term | 80 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | < 1.0E+6 | ohms | IEC 60093 |
| insulation resistance | < 1.0E+6 | ohms | IEC 60167 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature – hot air dryer | 70 to 95 | °C | |
| Drying time – hot air dryer | 2.0 to 4.0 | hr | |
| Barrel rear temperature | 220 to 250 | °C | |
| Barrel middle temperature | 220 to 250 | °C | |
| Barrel front temperature | 230 to 260 | °C | |
| Nozzle temperature | 220 to 250 | °C | |
| Processing (melt) temperature | 230 to 260 | °C | |
| Mold temperature | 40 to 80 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |