| About |
|---|
| LUVOCOM® 1301-8291是一种聚苯硫醚(PPS)材料,含有的填充物为芳族聚酰胺纤维。 该产品在亚太地区、北美洲、拉丁美洲、欧洲或非洲和中东有供货,。 LUVOCOM® 1301-8291的主要特性有: 抗翘曲 耐磨 典型应用领域包括: 医疗/保健 商业/办公用品 工程/工业配件 汽车行业 纺织/纤维&& |
| Product Description | |
|---|---|
| Supplier | Lehmann |
| Generic | PPS |
| Material Status | Commercial: Active |
| Features | Low warping,Low coefficient of friction,Good wear resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.38 | g/cm³ | ISO 1183 |
| Shrinkage rate | 0.40 to 0.80 | % | DIN 16901 |
| Water absorption rate | |||
| 23℃，24hr | < 0.20 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 6000 | MPa | ISO 527-2 |
| tensile strength | |||
| fracture | 80.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| yield | 2.0 | % | ISO 527-2 |
| Bending modulus | 5000 | MPa | ISO 178 |
| bending strength | 110 | MPa | ISO 178 |
| Bending strain | 2.6 | % | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | 12 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | 220 | ℃ | UL 746B |
| Maximum operating temperature | |||
| short-term | 240 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+12 | ohms | IEC 60093 |
| insulation resistance | > 1.0E+12 | ohms | IEC 60167 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | |||
| Hot air dryer | 100 to 140 | °C | |
| Hot air dryer, B | 50 to 90 | °C | |
| Drying time | |||
| Hot air dryer | 2.0 to 4.0 | hr | |
| Hot air dryer, B | > 4.0 | hr | |
| Barrel rear temperature | 300 to 320 | °C | |
| Barrel middle temperature | 310 to 330 | °C | |
| Barrel front temperature | 320 to 340 | °C | |
| Nozzle temperature | 320 to 340 | °C | |
| Processing (melt) temperature | 330 | °C | |
| Mold temperature | 150 to 180 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |