LUVOCOM® 19-7416

About
LUVOCOM® 19-7416 is a Polyamide 46 (Nylon 46) material filled with carbon fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of LUVOCOM® 19-7416 are: Conductive ESD Protection Good Stiffness Lubricated Typical applications include: Engineering/Industrial Parts Automotive Business/Office Goods Construction Applications Fabrics/Fibers&&

About

LUVOCOM® 19-7416 is a Polyamide 46 (Nylon 46) material filled with carbon fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of LUVOCOM® 19-7416 are: Conductive ESD Protection Good Stiffness Lubricated Typical applications include: Engineering/Industrial Parts Automotive Business/Office Goods Construction Applications Fabrics/Fibers&&

Product Description
Supplier	Lehmann
Generic	PA 46
Material Status	Commercial: Active
Features	Good Rigidity,Conductive,Lubricating
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.33	g/cm³	ISO 1183
Melt Flow Rate
300℃，2.16kg	12	g/10min	ISO 1133
Melt Volume Rate
300℃，2.16 kg	13.0	cm³/10min	ISO 1133
Shrinkage rate	0.20 to 0.50	%	DIN 16901
Water absorption rate
23℃，24hr	< 1.0	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	13000	MPa	ISO 527-2
tensile strength
fracture	200	MPa	ISO 527-2
Tensile strain
yield	2.2	%	ISO 527-2
Bending modulus	12000	MPa	ISO 178
bending strength	275	MPa	ISO 178
Bending strain	2.6	%	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	6.0	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength
23℃	50	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	> 290	℃	ISO 75-2/A
Continuous use temperature	150	℃	UL 746B
Maximum operating temperature
short-term	160	℃
Vicat Softening Temp	290	℃	ISO 306/A
Linear coefficient of thermal expansion
MD	2.0E-5	1/℃	DIN 53752
Thermal conductivity coefficient	0.35	W/m/K	DIN 52612

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	< 1.0E+4	ohms	IEC 60093
insulation resistance	< 1.0E+5	ohms	IEC 60167

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature
Hot air dryer, A	80	°C
Vacuum dryer, B	80	°C
Drying time
Hot air dryer, A	2.0 to 8.0	hr
Vacuum dryer, B	2.0 to 12	hr
Barrel rear temperature	285 to 315	°C
Barrel middle temperature	305 to 315	°C
Barrel front temperature	305 to 315	°C
Nozzle temperature	280 to 330	°C
Processing (melt) temperature	310	°C
Mold temperature	90 to 130	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.