| About |
|---|
| LUVOCOM® 19-8074 VP is a Polyamide 46 (Nylon 46) material filled with aramidptfe. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of LUVOCOM® 19-8074 VP: Wear Resistant. Typical applications include: Engineering/Industrial Parts Electrical/Electronic Applications Automotive Business/Office Goods Construction Applications&& |
| Product Description | |
|---|---|
| Supplier | Lehmann |
| Generic | PA 46 |
| Material Status | Commercial: Active |
| Features | Good wear resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.25 | g/cm³ | ISO 1183 |
| Shrinkage rate | 1.1 to 1.8 | % | DIN 16901 |
| Water absorption rate | |||
| 23℃，24hr | < 1.0 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3500 | MPa | ISO 527-2 |
| tensile strength | |||
| fracture | 85.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| yield | 6.0 | % | ISO 527-2 |
| Bending modulus | 3000 | MPa | ISO 178 |
| bending strength | 120 | MPa | ISO 178 |
| Bending strain | 7.5 | % | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 3.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| 23℃ | 30 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | 150 | ℃ | UL 746B |
| Maximum operating temperature | |||
| short-term | 160 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+12 | ohms | IEC 60093 |
| insulation resistance | > 1.0E+12 | ohms | IEC 60167 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | |||
| Hot air dryer, A | 80 | °C | |
| Vacuum dryer, B | 80 | °C | |
| Drying time | |||
| Hot air dryer, A | 2.0 to 8.0 | hr | |
| Vacuum dryer, B | 2.0 to 12 | hr | |
| Barrel rear temperature | 285 to 315 | °C | |
| Barrel middle temperature | 305 to 315 | °C | |
| Barrel front temperature | 305 to 315 | °C | |
| Nozzle temperature | 280 to 330 | °C | |
| Processing (melt) temperature | 310 | °C | |
| Mold temperature | 90 to 130 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |