LUVOCOM® 3F PAHT 9742 CF

About
LUVOCOM® 3F PAHT 9742 CF is a Polyamide material filled with carbon fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for 3d printing, fused filament fabrication (fff) or extrusion. Important attributes of LUVOCOM® 3F PAHT 9742 CF are: High Stiffness High Strength Typical applications include: Automotive Business/Office Goods Engineering/Industrial Parts&&

About

LUVOCOM® 3F PAHT 9742 CF is a Polyamide material filled with carbon fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for 3d printing, fused filament fabrication (fff) or extrusion. Important attributes of LUVOCOM® 3F PAHT 9742 CF are: High Stiffness High Strength Typical applications include: Automotive Business/Office Goods Engineering/Industrial Parts&&

Product Description
Supplier	Lehmann
Generic	PA Not specified
Material Status	Commercial: Active
Features	Good Rigidity,Low CLTE
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.40	g/cm³	ISO 1183
Shrinkage rate
3.0 mm	0.0 to 0.10	%	DIN 16901
Water absorption rate
23℃，24hr	< 0.30	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	15000	MPa	ISO 527-2
tensile strength	170	MPa	ISO 527-2
Tensile strain
yield	2.0	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23℃	47	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	240	℃	ISO 75-2/A
Continuous use temperature	150	℃	UL 746B
Maximum operating temperature
short-term	180	℃

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	< 1.0E+2	ohms	IEC 60093
insulation resistance	< 1.0E+2	ohms	IEC 60167

Process Conditions
Squeeze description	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method

Drying temperature	130	°C
Drying time	6.0 to 8.0	hr
Barrel 1 zone temperature	260 to 300	°C
Barrel 2 zone temperature	260 to 300	°C
Barrel 3 zone temperature	260 to 300	°C
Melt temperature	280	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.