| About |
|---|
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Weather resistance is good |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.980 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 22 to 28 | g/10min | ISO 1133 |
| Molding shrinkage | 0.90 to 1.7 | % | |
| Ash Content | |||
| 650℃ | 15000 | mm | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Broken BRK | 21.0 to 30.0 | MPa | ISO 527-2 |
| Flexural Modulus | 1250 to 1500 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | ISO 180 | ||
| -40℃ | 1.7 to 3.0 | kJ/m² | |
| 23℃ | 5.0 to 10 | kJ/m² | |
| Multi axial instrumented peak impact force | 850 to 1200 | N | ISO 527 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 0.45 MPa, unannealed | 75.0 | ℃ | ISO 75-2/B |
| Supplementary Information | Nominal value | Unit | Test method |
|---|---|---|---|
| Drying time | 2.0 | hr | |
| Drying temperature | 80 | ℃ |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |