| About |
|---|
| Product Description | |
|---|---|
| Supplier | LUXI |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt index | |||
| 300℃，1.2kg | 9 | g/10min | ISO 1133 |
| Density | 1.2 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| 23℃，24h | 0.2 | % | ISO 62 |
| Shrinkage rate | |||
| MD | 0.5-0.7 | % | ISO 294 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | |||
| 50mm/min | 60 | MPa | ISO 527 |
| fracture | |||
| 50mm/min | 70 | MPa | ISO 527 |
| Tensile strain | |||
| fracture | |||
| 50mm/min | ＞120 | % | ISO 527 |
| Tensile modulus | |||
| 1mm/min | 2400 | MPa | ISO 527 |
| bending strength | |||
| 2mm/min | 90 | MPa | ISO 178 |
| Bending modulus | |||
| 2mm/min | 2300 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 72 | kJ/m² | ISO 179 |
| Impact strength of cantilever beam notch | |||
| 23℃ | 66 | KJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.80MPa，4.0mm | 127 | ℃ | ISO 75 |
| Vicat Softening Temp | |||
| B120， 4.0mm | 148 | ℃ | ISO 306 |
| Flammability | |||
| 1.5mm | HB | UL94 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | |||
| 3.2mm | 90 | % | ASTM D1003 |
| Haze | |||
| 3.2mm | ＜0.5 | % | ASTM D1003 |
| Yellow index | |||
| 380-780nm | ＜2 | ISO 17223 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | |||
| 5min | 3.0E+17 | ohms·cm | IEC 60093 |
| Dielectric constant | 2.7 | 1 MHz | IEC 60250 |
| Dielectric strength | |||
| 1mm | 30 | kV/mm | IEC 60243 |
| Dissipation factor | 1.5E+2 | 1 MHz | IEC 60250 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |