Macromelt® OM678

About

Product Description
SupplierHenkel
GenericPA Not specified
Material StatusCommercial: Active
FeaturesExcellent Processability,Low Viscosity,Good bond

Technical Data
PHYSICALNominal valueUnitTest method
Density0.98g/cm³
viscosity
210℃3.4Pa·s

MECHANICALNominal valueUnitTest method
Shore hardness88A 级
Tensile strain
fracture400%

THERMALNominal valueUnitTest method
Vicat Softening Temp187±5
Forming temperature210-240°C
Glass transition temperature-50
Thermal conductivity coefficient0.15W/m/℃

FLAME CHARACTERISTICSNominal valueUnitTest method
Flame retardant levelV-0UL 94

Electrical performanceNominal valueUnitTest method
Volume resistivity1.9e17ohms·cm
Insulation strength>20kV/mm

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.