| About |
|---|
| PET+ Filament Engineering Grade High quality filament that balances superior mechanical properties and ease of use Flexible Strength More flexible strength than ABS or PLA. Excellent for Wearables and Prototypes Universal Compatibility 1.75mm and 3mm sizes, PET+ is suitable for most FFF Printers. Features: Strong and Flexible 100% Recyclable Easy Adhesion Hydrophobic&& |
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,Hydrophobic,Renewable resources,Good bond,HB,V-2 |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Water absorption rate | |||
| balance | > 0.015 | % | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched impact strength of cantilever beam | 37 | J/m | |
| Impact Resistance（Energy） | 89 to 111 | N |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 71.8 | ℃ | |
| 1.8 MPa, unannealed | 65.0 | ℃ | |
| Glass transition temperature | 82.0 | ℃ | |
| Vicat Softening Temp | 84.0 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+16 | ohms | |
| Volume resistivity | 1.0E+15 | ohms·cm | |
| Dielectric strength | 14 to 18 | kV/mm |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| > 1.60 mm | HB | ||
| > 3.20 mm | V-2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 102 to 112 | ||
| tensile strength | |||
| yield | 45.8 | MPa | |
| fracture | 18.1 | MPa | |
| Tensile strain | |||
| fracture | 18 | % | |
| Bending modulus | 1840 | MPa | |
| bending strength | 68.1 | MPa |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |