About |
---|
Magnobond 3347 is an Epoxy; Epoxide (Epoxy) product. It is available in North America. Typical application: Electrical/Electronic Applications. Primary characteristic: low viscosity.&& |
Product Description | |
---|---|
Generic | 环氧树脂 |
Material Status | Commercial: Active |
Features | Good Electrical Properties,Low Viscosity |
Availabilitys | North America |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.15 | g/cm³ | ASTM D792 |
Electrical performance | Nominal value | Unit | Test method |
---|---|---|---|
Surface resistivity | 6.8E+16 | ohms | ASTM D257 |
Volume resistivity | 3.3E+16 | ohms·cm | ASTM D257 |
Dielectric constant | |||
1 kHz | 2.83 | ASTM D150 | |
Dissipation factor | ASTM D150 | ||
1 kHz | 4.0E-3 | ASTM D150 | |
1 MHz | 0.015 | ASTM D150 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
storage stability | |||
52 ℃ | 22 | min |
Thermosetting mixed viscosity | Nominal value | Unit | Test method |
---|---|---|---|
stripping time | |||
130℃ | 120 to 240 | min |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |